EG11W diaphragm valve with internal thread, diaphragm valve with internal thread

EG11W Internal thread diaphragm Valve Product introduction:

The opening and closing part of the internal thread diaphragm valve is a diaphragm made of soft material that separates the inner cavity from the inner cavity of the valve cover and the driving part. The diaphragm made of soft seal such as rubber or plastic has good sealing property. Because the diaphragm is a wearing part, it should be replaced regularly depending on the characteristics of the medium. Internal thread diaphragm valve for media containing hard suspended matter; Because the internal thread diaphragm valve medium is only in contact with the valve body and diaphragm, there is no need for stuffing box, there is no stuffing box leakage problem, and there is no corrosion possibility for the valve stem part.

Product implementation standards:

1. Design and manufacture: BS5156

2. Structure length: BS5156

3. Flange connection size: BS4504, DIN2532, JIS B2212, ANSI B16.1, ISO2004

Product use:

This valve is specially used to control the general corrosive media, and can be used for opening and closing and throttling on all kinds of pipelines or equipment.

Applicable temperature: ≤120℃, ≤150℃(according to diaphragm material)

Pressure rating: PN(MPa) 0.6 1.0 1.6

Product testing:

Lining layer: electrical spark detection

Test and inspection according to BS6755 standard

Nominal pressure: PN(MPa)

Valve body: PN×1.5

Seal: PN×1.1

This valve is specially used to control the general corrosive media, and can be used for opening and closing and throttling on all kinds of pipelines or equipment.

Applicable temperature: ≤120℃, ≤150℃(according to diaphragm material)

Pressure rating: PN(MPa) 0.6 1.0 1.6

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.