Product Code : VF--GMCC-GM9-CU
Working pressure; 0.2 MPa to 0.6 MPa
Working medium; Clean air
Metric connection thread; 20-100.
Valve body; ADC12 aluminum alloy
Please contact us if you need customized services. We will contact you with the price and availability in 24 hours.
| Product | Product Code | Purity | Size | Contact Us |
DMF-Z Electromagnetic diaphragm Valve product introduction:
The pulse valve (also known as the diaphragm valve) is the compressed air "switch" of the ash spray system of the pulse bag dust collector. Controlled by the output signal of the pulse injection controller, the filter bag is sprayed and cleared by row (chamber), so that the pressure of the dust collector is kept within the set range to ensure the processing capacity and dust removal efficiency of the dust collector. DMF-Z type electromagnetic pulse valve is a right Angle valve, the Angle between the inlet and outlet is 90℃, it is suitable for the falcon air cylinder and the dust collector spray pipe and installation connection. The air flow is smooth, and can provide the cleaning gas pulse that meets the requirements
Product working principle:
The diaphragm divides the electromagnetic pulse valve into the front and the back two chambers. When the compressed air is connected, the compressed air enters the rear chamber through the throttle hole. At this time, the pressure of the rear chamber will be close to the output outlet of the valve, and the electromagnetic pulse valve is in the "closed" state.
The electrical signal of the pulse injection controller makes the electromagnetic pulse valve armature move back, the air chamber release hole behind the valve opens, the rear air chamber quickly loses pressure, the diaphragm assembly moves back, the compressed air is sprayed through the valve outlet, and the electromagnetic pulse valve is in the "open" state.
The electrical signal of the pulse injection control instrument disappears, the electromagnetic pulse valve armature resets, the vent hole of the rear air chamber is closed, and the pressure of the rear air chamber increases so that the diaphragm assembly is close to the outlet of the valve, and the electromagnetic pulse valve is in the "closed" state.
The pulse valve (also known as the diaphragm valve) is the compressed air "switch" of the ash spray system of the pulse bag dust collector. Controlled by the output signal of the pulse injection controller, the filter bag is sprayed and cleared by row (chamber), so that the pressure of the dust collector is kept within the set range to ensure the processing capacity and dust removal efficiency of the dust collector.
Packing of Standard Packing:
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’ is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.
