High pressure 1500LB ball valve,1500LB High-pressure Ball Valve,1500LB Ball Valve

Structural characteristics

1. When the ball valve is fully opened and fully closed, the sealing surface of the ball and the seat is isolated from the medium, so the medium passing through the valve at high speed will not cause the erosion of the sealing surface.

2, ball valve structure is simple, good sealing, small opening and closing torque.

3, with the lowest flow resistance (actually close to zero).

4, reduced or full diameter.

5, flange end face or butt weld end face.

6, the soft seal ball valve has a fireproof anti-static device.

7. The valve stem is designed for blowout prevention, which can prevent the valve stem from ejecting from the valve body due to improper operation.

8, can support a variety of driving device connection disk. The driving device includes handle, worm gear, electric, pneumatic, gas-hydraulic linkage, electro-hydraulic linkage, etc.

9. Convenient position adjustment. When the actuator is replaced or installed online, the position of the ball hole cannot be seen clearly. The BTL ball valve provides a special "positioning slot", which makes it easy and accurate to find the position of the ball valve fully open and fully closed. Convenient adjustment of actuator limit device.

10, for the valve with welded end, the valve end material (transition section) can be adjusted according to the user's pipe material grade response to ensure the suitability and weldability of the material strength. Valve with sleeves at both ends, the length of the sleeves can ensure that the field welding operation does not affect the sealing material.

11, buried design. The valve stem of the buried valve is lengthened according to the needs of the project to facilitate the operation on the ground, and the corresponding grease injection, blowdown and empting devices are extended from the pipe to the ground.

High pressure ball valve was born in the 1950s, with the rapid development of science and technology, the continuous improvement of production process and product structure, in a short time of 40 years, has rapidly developed into a major valve class.

The high temperature ball valve is a metal sealing structure, the sealing form is metal-to-metal sealing, the metal sealing ring can be exchanged, the stainless steel plate and the graphite composite plate sealing ring are metal sealing. In addition to the drive form of the hard seal butterfly valve, there are manual, worm gear transmission, pneumatic and so on. The butterfly plate of the high temperature ball valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the hard sealed ball valve body, the disc-shaped disc rotates around the axis, the rotation Angle is between 0° and 90°, and the valve is fully open when it is rotated to 90°.

The main characteristics of the high-pressure ball valve are its compact structure, reliable sealing, simple structure, convenient maintenance, sealing surface and spherical surface are often in a closed state, not easy to be washed away by the medium, easy to operate and maintain, suitable for water, solvents, acids and natural gas and other general working media, but also suitable for poor working conditions of the medium, such as oxygen, hydrogen peroxide, methane and ethylene, etc. It is widely used in various industries. Ball valve body can be integral, can also be combined.

The main features of high temperature ball valve are its compact structure, reliable sealing, simple structure, convenient maintenance, sealing surface and spherical surface are often in a closed state, not easy to be washed away by the medium, easy to operate and maintain, suitable for water, solvents, acids and natural gas and other general working media, but also suitable for poor working conditions of the medium, such as oxygen, hydrogen peroxide, methane and ethylene, etc. It is widely used in various industries. Ball valve body can be integral, can also be combined.

Packing of Standard Packing: 

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 470 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.

The 1500LB (Pound-Class) Ball Valve is a high-performance fluid control device designed for critical applications in industries requiring robust, reliable, and durable valve solutions. This valve class is specifically engineered to handle high-pressure environments, ensuring optimal performance under demanding conditions. The ball valve design provides excellent shut-off capabilities with minimal pressure drop, making it ideal for various industrial processes.