Three piece stainless steel socket welding ball valve

Three-piece butt welded ball valve and flange gate valve are the same type of valve, the difference is that its closing part is a ball, the ball rotates around the center line of the valve body to achieve the opening and closing of a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Two-piece ball valve, three-piece ball valve, is widely used in a new type of valve, this type of valve in the pipeline generally should be installed horizontally

Three-piece butt welded ball valve has the following advantages:

one The fluid resistance is small, and its resistance coefficient is equal to that of the pipe segment of the same length.

2, simple structure, small size, light weight.

3, tight and reliable, ball valve sealing surface material is widely used plastic, good sealing, in the vacuum system has also been widely used.

4, easy to operate, open and close quickly, from full open to full close as long as the rotation of 90 degrees, easy to remote control.

5, easy maintenance, ball valve structure is simple, the sealing ring is generally active, disassembly and replacement are more convenient.

6, when fully open or fully closed, the sealing surface of the ball and the seat is isolated from the medium, and the medium will not cause the erosion of the valve sealing surface.

7, wide range of application, small diameter to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied

Product application

Electric three-piece welded ball valve is a widely used gas valve, with its own advantages, friction-free switch, seal will not be worn, opening and closing torque is small, the optional actuator is mainly compact type to achieve cutting off or adjusting the medium. Nowadays, it is the preferred product of gas equipment, petrochemical, aerospace, vacuum equipment, electroplating equipment, agricultural machinery, food machinery, iron and steel metallurgy, HVAC, drying equipment, biopharmaceutical, medical equipment and other industries. 

Packing of Standard Packing:

 Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Solutions are packaged in polypropylene, plastic or glass jars up to palletized 2022 gallon liquid totes Special package is available on request. E FORUs’  is carefully handled to minimize damage during storage and transportation and to preserve the quality of our products in their original condition.